YANMAR DE36F Used Motor Boats for Sale in Japan

Popular shaft ship with open sea specifications. Overall, the hull is sturdy. This size makes it easy for one person to maneuver the boat.
appearance/peller/rudder
Overall, a solid hull. The rudder, peller, and shaft are in good condition. The flaps are said to work well.
Front deck/flat type
A wide pulpit has been built for easy access from the front and the bow rail is at a safe height. The bow rails are of a safe height, and the hairpin has been replaced with a stainless steel one that will not rot like wood. The fish tank hatch has also been replaced with a sturdy stainless steel hatch. The original FRP hatches are kept. Seawater deck hoses are attached at various locations. The rubber gaskets on the scuppers have been recently replaced, but they are still loose somewhere and water collects a little at a time.
The bridge
side deck is 59cm wide/37cm high/40cm handrail on it. It is very wide. The windows are glass so they are transparent and have good visibility. It is equipped with LED lights. Navigation lights in various places are illuminated. It is equipped with rudder remote control and forward/reverse remote control.
Aft Deck
This deck is also flat and easy to work on. The surface is gutted. The cylinders are wrapped with rust-preventive cloth. The water in the fish tank is pumped up and supplied to the deck seawater hose. A manual marine toilet is installed. A simple curtain is used to blindfold the guests. The spanker sails appear to have just been re-stretched.
Cockpit/Cabin
is used in a small and neat manner for its age. The switchboard was replaced in 2022. At the same time, the wiring was also cleaned up. The hour meter at the time of the interview shows 7123 hours of actual operation.
Yanmar 4CX-GT/rated 230 hp
This engine is the second generation. The previous owner replaced it around 2003 and the turbo was replaced in 2020. The engine oil and filter have been changed every season. The cruise is said to run at about 18 knots at 2000 rpm.